JYTOP XLPE POWER CABLE

phone
You are here: Home » News » BS5467 6943X 10mm 3 core swa cable

BS5467 6943X 10mm 3 core swa cable

Posted by: JYTOP Cable      Email:[email protected]

Leave a Reply

Your email address will not be published. Required fields are marked *

  • Power Cable

    Power Cable

    Power cables are mainly used for power transmission and distribution purpose. It is an assembly of one or more individually insulated electrical conductors, usually held together with an overall sheath. The assembly is used for transmission and distribution of electrical power. Electrical power cables may be installed as permanent wiring within buildings, buried in the ground and run overhead or exposed.……Including: rubber cable, welding cable, URD cable, XLPE insulated power calbe etc.

  • Bare Overhead Conductor

    Bare Overhead Conductor

    Bare Overhead Conductors are used in overhead transmission and distribution network applications.They are also used for un-insulated hook ups, jumpers, grounding conductors and other applications. Our Conductors conform to ASTM, IEC, BS, BS EN and DIN standards.…… Including: AAC conductor, AAAC conductor, ACSR conductor, ACAR conductor, AACSR conductor, etc.

  • Aerial Bundled Cable

    Aerial Bundled Cable

    Aerial bundled cables (also aerial bundled conductors or simply ABC) are overhead power lines using several insulated phase conductors bundled tightly together, usually with a bare neutral conductor. Our abc calbe conform to ASTM, IEC, SANS standards.……Including: abc cables, cvered line wire, service drop wire etc.

    • 10mm 3 core swa cable10mm 3 Core Armoured Cable parameter:
     
    No. of cores / size of cable: Size: 3 core 10.0mm
    Approx overall diameter: 19.5mm
    Approx weight (m): 0.82Kg
    Current Rating: 73A
    Product Code: 6943X 10mm
    BS Number: BS5467
    Conductors: Class 1/2 annealed bare copper solid or strands. This wires are formed into final conductor in the stranding machines under strict quality surveillance.
    Insulation: Cross-Linked Polyethylene (XLPE) or PVC, The raw materials and thicknesses of Insulation are maintained, conform to IEC60502/BS7870 Standards.
    Core identification: Red, Yellow Blue Brown, Black, Grey 
    Bedding: PVC
    Armour / Protection: Steel Wire, the armour consists of single layer of galvanised steel wires/galvanized steel tapes.
    The armour is applied helically as per standards.
    Sheath / Jacket: PVC, Special FR, FRLS, FRRT, LSF, MDPE compounds are used for outersheath of cables, to suit customer's specific requirements.
    Colour: Black
    Voltage: 600V/1000V
    Operating temperature: 90°C Maximum
    Standard: BASEC Approved; BS5467 Thermosetting Insulated
    Application: Primarily found in powered networks and providing mains electricity to powered devices.
    Voltage rating: 600/1000V
    Temperature rating: 0°C to 70°C
    Minimum bending radius: 6 x overall diameter
     
    Main application:
    – The Railway and Transport industry;
    – Underneath roads powering buildings;
    – Industrial networks such as power plants and factories;
    – cable ducting in the roofs of warehouses;

    600/1000V steel wire armoured power cable technical parameter:
     

    Cross Section (mm2) Insulation Thickness (mm) Armour Dia (mm) Sheath thickness (mm) Outer diameter approx.(mm) Weight approx (Kg/Km)
    50 1.4 1.25 1.5 19.1 820
    70 1.4 1.25 1.6 21.1 1070
    95 1.6 1.25 1.6 23.4 1390
    120 1.6 1.6 1.7 26.3 1600
    150 1.8 1.6 1.7 28.3 1900
    185 2 1.6 1.8 30.8 2450
    240 2.2 1.6 1.9 34.1 3100
    300 2.4 1.6 1.9 37 3760
    400 2.6 2.0 2.1 42 4850
    500 2.8 2.0 2.1 45.6 5930

    Pre:
    Next: 3c x 2.5 sq.mm cable