JYTOP XLPE POWER CABLE

phone

10mm 4 core armoured cable

Leave a Reply

Your email address will not be published. Required fields are marked *

  • Power Cable

    Power Cable

    Power cables are mainly used for power transmission and distribution purpose. It is an assembly of one or more individually insulated electrical conductors, usually held together with an overall sheath. The assembly is used for transmission and distribution of electrical power. Electrical power cables may be installed as permanent wiring within buildings, buried in the ground and run overhead or exposed.……Including: rubber cable, welding cable, URD cable, XLPE insulated power calbe etc.

  • Bare Overhead Conductor

    Bare Overhead Conductor

    Bare Overhead Conductors are used in overhead transmission and distribution network applications.They are also used for un-insulated hook ups, jumpers, grounding conductors and other applications. Our Conductors conform to ASTM, IEC, BS, BS EN and DIN standards.…… Including: AAC conductor, AAAC conductor, ACSR conductor, ACAR conductor, AACSR conductor, etc.

  • Aerial Bundled Cable

    Aerial Bundled Cable

    Aerial bundled cables (also aerial bundled conductors or simply ABC) are overhead power lines using several insulated phase conductors bundled tightly together, usually with a bare neutral conductor. Our abc calbe conform to ASTM, IEC, SANS standards.……Including: abc cables, cvered line wire, service drop wire etc.

  • 10mm 4 core armoured cable4 core 10mm pvc Armoured or Unarmoured Electrial Power Cable: 
     
    Reference Standards: IEC60502-2, IEC 60228, IEC60332 -1/2/3, BS6622, BS7835, VDE0276, AS/NZS 1429.1, GB/T 12706, etc. 
    Rated Voltage: 6/10kV, 6.35/11kV (12kV), 8.7/15kV, 12/20kV, 18/30kV, 19/33kV
    Core Number: 4 core
    Available Dimensions: 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
     
    Application: 
    For power networks, underground, outdoors and in cable ducting. It is recommended that installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation. 
     
    Construction: 
    Conductor: Stranded round compacted copper or aluminum conductor (Cu / Al ), copper wire annealed. 
    Conductor Screen: Semi-conducting material
    Insulation: XLPE (Cross-Linked Polyethylene) / PVC
    Insulation Screen: Semi-conducting material
    Metallic Screen: Copper tape screen or copper wire screen (CTS / CWS )
    Filler: PP rope
    Separator: Binding tape
    Bedding: PVC (Polyvinyl Chloride)
    Armouring: Single Core: Aluminium Wire Armoured (AWA) Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)
    Sheath: PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR
    Colour: Red or Black
     
    Temperature Rating: 0°C to 90°C
    Minimum Bending Radius:
    Single Core: 15 x overall diameter
    Three Core: 12 x overall diameter (Single Core 12 x overall diameter and 3 core 10 x overall diameter where bands are positioned adjacent to joint or terminations provided that the bending is carefully controlled by the use of a former)
     
    XLPE insulated power cabledo not has excellent electric, mechanical properties, but also has powerful resistance against chemical corrosion, heat resistance and enviromental stress resistance. Its structure is simple. The long period operating temperature is 90 °C. It is conveninet to use and can be laid with no restriction of different level. 
     

    Pre:
    Next: Cable metal sheathed wiring types